SM Trading Marine Maintenance Products
Pipe Emergency
Repair
Rapid-response compounds and putties for sealing pipe leaks, cracks, flanges and valves in dry, wet and underwater service conditions.
Emergency Leak Sealing Solutions
Select a repair material according to surface condition, available curing time and service environment. The products below are selected from the SM Trading catalogue for pipe, flange, valve and wet-area emergency repairs.
DV Metal Series
DV Metal SF1 Type
Fast-curing iron-filled epoxy developed for emergency sealing and rebuilding work completed in approximately one hour.
Pipe Repair Applications
- Emergency repair of pipes, valves, tanks and pumps.
- Adheres to iron, aluminum, copper, concrete and plastic.
- Can be cut, drilled, tapped and sanded after curing.
DV Metal Series
DV Metal A1 Type
Iron-filled epoxy compound for sealing and restoring damaged metal, concrete and plastic components.
Pipe Repair Applications
- Seals leaks around pipes, flanges and valves where welding is impractical.
- Restores cracks, surface damage and worn metal parts.
- Machinable after full cure.
Stick Metal Bond
Stick Metal Bond (A) Type
Hand-mixable metal repair stick for rapid patching, rebuilding and temporary leak-sealing work.
Pipe Repair Applications
- Repairs pipes, cracks and leaking metal parts.
- Suitable for iron and aluminum components.
- Can be drilled, tapped, sawed, sanded and painted.
Stick Metal Bond
Stick Metal Bond (UW) Type
Fast-curing putty stick for leaks and damage on wet surfaces, tanks, fittings and underwater components.
Wet Repair Applications
- Leaking gaskets, water tanks, pools and wet-area fittings.
- Fiberglass, metal and wooden marine components.
- Adheres to PVC and damp surfaces.
Under Water Series
Under Water Putty (UW)
Non-sag two-component epoxy that bonds and cures on wet surfaces and underwater with minimal shrinkage.
Wet Repair Applications
- Joint filling, crack repair, caulking and embedded insert bonding.
- Works on damp and submerged concrete or rock surfaces.
- Suitable for vertical and overhead application.
Kot Bond Series
Kot Bond Steel Type
Steel repair compound for sealing leaks and rebuilding damaged areas when hot work or welding is unavailable.
Pipe Repair Applications
- Pipes, flanges and valves.
- Cracked castings and worn metal components.
- Resistant to oil, gasoline, water and many chemicals.
Kot Bond Series
Kot Bond Red Type
Repair and protection compound for severe corrosion, cracking and leakage on metal and non-metal equipment.
Pipe Repair Applications
- Valve seats and leaking flange areas.
- Waterproofing and corrosion protection.
- Machinery damaged by wear, salt or gas exposure.
Kot Bond Series
Leveling Compounds (Yellow)
Trowel-applied compound for filling and leveling corroded, pitted, cracked or leaking equipment surfaces.
Pipe Repair Applications
- Valve seats, flange leaks and corroded surfaces.
- Surface leveling, waterproofing and corrosion protection.
- Metal and non-metal maintenance applications.
Kot Bond Series
Strong-back Activator & Resin
Filling and reinforcement system for cracks, holes and cavities in pipes, metal, concrete and ceramic.
Pipe Repair Applications
- Fills cracks, holes and recessed areas in piping components.
- Compatible with metal and non-metal substrates.
- Provides reinforcement around prepared repair areas.
Technical note: These cold-applied materials are intended for maintenance repair after the line has been isolated, depressurized and made safe. Product suitability must be confirmed against the service fluid, pressure, temperature, substrate and damage condition. Curing time varies with ambient and material temperature.
Need help selecting a pipe repair product?
Send us the pipe material, diameter, service fluid, pressure, temperature and leak condition for a suitable recommendation.